Open Access Open Access  Restricted Access Subscription Access

Artificial Intelligence in Non-Traditional Machining: A Comprehensive Review of Process Optimization, Prediction, Monitoring, and Intelligent Manufacturing

Sayeed Baig, Sowmya PR, Rishitha Rasineni, Vaibhav M

Abstract


Non-traditional machining processes are increasingly used for difficult-to-machine alloys, brittle materials, intricate geometries, and micro-scale features where conventional cutting may be limited. Their performance, however, depends on strongly coupled electrical, thermal, chemical, mechanical, and fluidic phenomena. Artificial intelligence (AI) provides a data-driven layer for modelling these nonlinear relationships, predicting quality, selecting process parameters, identifying unstable states, and supporting adaptive control. This paper reviews the role of AI across major non-traditional machining processes, with emphasis on electrical discharge machining, wire electrical discharge machining, electrochemical machining, laser beam machining, abrasive water jet machining, and related processes. The review organizes existing work into four functions: process optimization, prediction, monitoring, and intelligent control. Representative studies using artificial neural networks, support vector machines, fuzzy systems, genetic algorithms, particle swarm optimization, ensemble learning, and deep learning are examined. Recent evidence shows that AI can reduce the need for repeated physical trials and improve prediction of material removal rate, surface roughness, kerf characteristics, and other quality indicators. At the same time, small experimental datasets, material-specific models, weak external validation, sensor variability, limited interpretability, and the gap between offline prediction and real-time control remain important barriers. The paper therefore argues for physics-informed learning, uncertainty-aware prediction, digital twins, multimodal sensing, and closed-loop validation as the next stage of intelligent non-traditional machining.


Full Text:

PDF

References


Y. Natarajan, P. K. Murugesan, M. Mohan, and S. A. L. A. Khan, “Abrasive water jet machining process: A state of art of review,” Journal of Manufacturing Processes, vol. 49, pp. 271–322, 2020, doi: 10.1016/j.jmapro.2019.11.030.

A. N. Bakhtiyari, Z. Wang, L. Wang, and H. Zheng, “A review on applications of artificial intelligence in modeling and optimization of laser beam machining,” Optics & Laser Technology, vol. 138, 106721, 2021, doi: 10.1016/j.optlastec.2020.106721.

A. P. Markopoulos, D. E. Manolakos, and N. M. Vaxevanidis, “Artificial neural network models for the prediction of surface roughness in electrical discharge machining,” Journal of Intelligent Manufacturing, vol. 19, no. 3, pp. 283–292, 2008, doi: 10.1007/s10845-008-0081-9.

H. Yang, H. Zheng, and T. Zhang, “A review of artificial intelligent methods for machined surface roughness prediction,” Tribology International, vol. 199, 109935, 2024, doi: 10.1016/j.triboint.2024.109935.

J. H. Ko and C. Yin, “A review of artificial intelligence application for machining surface quality prediction: from key factors to model development,” Journal of Intelligent Manufacturing, vol. 37, pp. 775–798, 2026, doi: 10.1007/s10845-025-02571-y.

S. Liu, J. Bao, and P. Zheng, “A review of digital twin-driven machining: From digitization to intellectualization,” Journal of Manufacturing Systems, vol. 67, pp. 361–378, 2023, doi: 10.1016/j.jmsy.2023.02.010.

X. Fu, S. Li, H. Song, and Y. Lu, “Digital Twin-driven multi-scale characterization of machining quality: current status, challenges, and future perspectives,” Robotics and Computer-Integrated Manufacturing, vol. 93, 102902, 2025, doi: 10.1016/j.rcim.2024.102902.

U. M. R. Paturi, S. Cheruku, V. P. K. Pasunuri, S. Salike, N.S. Reddy, and S. Cheruku, “Machine learning and statistical approach in modeling and optimization of surface roughness in wire electrical discharge machining,” Machine Learning with Applications, vol. 6, 100099, 2021, doi: 10.1016/j.mlwa.2021.100099.

M. Ulas, O. Aydur, T. Gurgenc, and C. Ozel, “Surface roughness prediction of machined aluminum alloy with wire electrical discharge machining by different machine learning algorithms,” Journal of Materials Research and Technology, vol. 9, no. 6, pp. 12512–12524, 2020, doi: 10.1016/j.jmrt.2020.08.098.

B. Sarker, S. Chakraborty, R. Čep, and K. Kalita, “Development of optimized ensemble machine learning-based prediction models for wire electrical discharge machining processes,” Scientific Reports, vol. 14, 23299, 2024, doi: 10.1038/s41598-024-74291-x.


Refbacks

  • There are currently no refbacks.