Open Access
Subscription Access
DESIGN AND OPERATION OF LOW COST PORTABLE POWER GENERATION USING HAND PEDAL FOR MULTIPURPOSE
Abstract
In the modern era where the power requirement is high, this project will be useful for the production of power without effecting the environment such as global warming, greenhouse gas, pollution etc Pedal power generation use the human support to produce the power. In this paper an alternator is used as an electricity generator. The motor is coupled to a pulley in bicycle structure as chain sprocket system. In existing inventions, most components of pedal power generation are present. With the bicycle structure it brings an innovation in generating the power through hand pedal thus this pedal power generator will inspire many students and the public with the innovative idea. In our country as the necessity of power is high so it can be used in the villages by small family by pedaling and storing the energy in the battery and this will not only provide electricity when needed but also it will an physical exercise for the person while pedaling, Due to wide range of application with low initial and very low maintenance cost this will be very useful.
References
Low Cost Portable Wind Power Generation For Mobile Charging Applications. Ratnakumar Rajan Department of Electrical and Electronic Engineering University of Jaffna Kilinochchi, Sri Lanka.
Optimal Start-up of Micro Power Generation Processes Paul I. Bartona*, Alexander Mitsosa , and Benoît Chachuata a Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue (room 66-464), Cambridge, MA 02139-4307, USA
Understanding portable generators,Energy Technology Data Exchange (ETDEWEB)Hills, A.; Hawkins, B. [Guelph Univ., ON (Canada); Clarke, S. [Ontario Ministry of Agriculture, Food and Rural Affairs, Toronto, ON (Canada) 2000-06-01
Design and Construction of Multi-Purpose Hand Crank Mechanical Energy Charger Francisco O. Ocampo,Ronald Q. Constantino, Michelle P. Soriano
Design and development of Portable Power Generation Case: Swaroop R. Bangera1, Akshay B. Dhanawade2, Akshay D. Gaikwad3, Sushant R. Jadhav4,Amey S. Shirodkar5UG Student, Department of Mechanical Engineering, Shivajirao S. Jondhale College of Engineering, Dombivli, Maharashtra, India1234 Assistant Professor, Department of Mechanical Engineering, Shivajirao S. Jondhale College of K. Elissa, “Title of paper if known,” unpublished.
Kavya Prayaga, R A Sanjeevkumar, T Anathapadmanabha, H R Sudarshan Reddy Modelling of Nine Level Cascaded Hbridge PV Power Fed Inverter Using Matlab/Simulink International Conference on Advanced Computing and Communication System (ICACCS-2017) (2017) Jan.06-07
B. Karur and S. R A, "Multi-level Transformerless PV inverter Based Real and Reactive Power Injection for Single Phase System," 2020 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER), 2020, pp. 258-262, doi: 10.1109/DISCOVER50404.2020.9278123.
R A Sanjeevkumar Sumit A Novel Generalised Topology of a Reduced Part Count Supply Multilevel Inverter with Level Boosting Network to Improve the Quality of GlobalTransitions Proceedings (2021), 10.1016/j.gltp.2021.08.019ISSN 2666-285X
oujanya Kulkarni, Sanjeevkumar R A Modified Transister Clamped H-bridge –based Cascaded Multilevel inverter with high reliability International Journal of Research in Advent Technology, 6 (6) (2018)Ju
Refbacks
- There are currently no refbacks.