Open Access
Subscription Access
Insulator Descriptions in Highly Polluted Areas
Abstract
This work describes the insulators in Highly polluted Areas with better provision for making desired choice of insulators to use. The corrected conductivity and ESSD of tap water were experimentally measured to provide accurate readings. The system's effectiveness is based primarily on service continuity and the avoidance of interruptions that result in financial losses for the company and users. Contaminants deposit on the insulator surface, forming contamination. Check the isolator's pollution level to see when it needs to be cleaned or repaired to prevent pollution problems. Evaluation of how various isolator models (size, shape, and/or length) and/or insulating materials perform in a polluted environment.
References
Abd-Rahman, R., Haddad, A., Harid, N., & Griffiths, H. (2018). Stress control on polymeric outdoor insulators using Zinc oxide microvaristor composites. IEEE Trans. Dielectr. Electr. Insul., 19(26): 705–713.
Abd-Rahman, R., Haddad, A., Kamarudin, M.S., Yousof, M.F.M., & Jamail, N.A.M. (2017). Dynamic modelling of polluted outdoor insulator under wet weather conditions. In Proceedings of the 2016 IEEE International Conference on Power and Energy (PECon), Melaka, Malaysia, 28(29): 610–614.
Abd-Rahman, R., Haddad, A., & Harid, N. (2017). Dynamic nonlinear model for polluted outdoor insulators. In Proceedings of the 7th International Symposium on High Voltage Engineering, Hannover, Germany, 12(16): 22–26.
Abd-Rahman, R., Haddad, A., & Harid, N. (2016). Performance of nonlinear grading coating on polymeric outdoor insulators under lightning impulse voltages. In Proceedings of the 21st International Conference on Electricity Distribution CIRED, Frankfurt, Germeny, 12(9):6–9.
Ahmed, R., Kim, T., Lee, Y. J., Jeon, S., Yi, J., Choi, I. H., Son, J. A., & Koo, J. B. (2020). Online Condition Monitoring and Leakage Current Effect Based on Local Area Environment. Trans. Electr. Electron. Mater. 22(21), 144–149.
Amin, M., & Ahmed, M. (2019). Effect of UV radiation on HTV-silicon rubber insulators with moisture, Inst. of Elec. and Elec. Eng. Computer Society, Lahore, Pakistan, 10(21), 35-44.
Amin, M., Akbar.M., & Matsuoka, R. (2018). Effect of UV radiation, temperature and salt fog on polymeric insulators, Institute of Electrical and Electronics Engineers Inc., Bali, Indonesia, 20(17): 45-54.
Amin, M., Akbar, M., & Khan, M. N. (2017). Aging Investigations of Polymeric Insulators: Overview and Bibliography, IEEE Electrical Insulation Magazine, 23(4), 44-50.
Arabani, P., Shirani, A., & Hojjat, M. (2017). New Investigation on Insulation Failures in Iranian. 1(5), 31-44.
Arshad, A., Nekahi, A., McMeekin, S.G., & Farzaneh, M. (2018). Effect of Pollution Layer Conductivity and Thickness on Electric Field Distribution along a Polymeric Insulator. In Proceedings of the 50th International Universities Power Engineering Conference(UPEC), Stoke On Trent, UK, 14(20), 1–4.
Refbacks
- There are currently no refbacks.