A Review on Filtration Techniques for Reduction of Tailpipe Emissions
Abstract
Tailpipe emissions from internal combustion engines remain a major contributor to urban air pollution, releasing particulate matter (PM), nitrogen oxides (NOx), carbon monoxide (CO), and unburned hydrocarbons (HC). With emission standards such as Bharat Stage VI (BS-VI) and Euro 6 growing stricter, aftertreatment and filtration technologies have become essential for regulatory compliance. This paper reviews the main techniques for reducing tailpipe emissions, including diesel and gasoline particulate filters (DPF and GPF), three-way catalysts (TWC), selective catalytic reduction (SCR), diesel oxidation catalysts (DOC), and lean NOx traps (LNT). It also examines emerging approaches such as electrostatic precipitation, nanofiber membrane filters, and zeolite-based adsorbents. Each technique is compared in terms of working principle, filter materials, pollutant removal efficiency, regeneration requirements, backpressure and fuel-economy effects, and cost. The review also considers how these systems perform under real-world driving conditions. The findings show that no single technology addresses all pollutants, and that integrated aftertreatment systems offer the most effective route to meeting current and future emission norms. This is a draft built from general knowledge. Once your paper is written, revise it so it reflects your actual scope, methods, and findings, and add specific figures only from sources you cite .I can also tailor it to a specific focus (such as DPF only or the BS-VI context) or shorten it to a word limit.
References
Guan et al., “Review of the state-of-the-art of exhaust particulate filter technology in internal combustion engines,” Journal of Environmental Management, vol. 154, pp. 225–258.
Lee, Theis, and Kyriakidou, “Vehicle emissions trapping materials: Successes, challenges, and the path forward,” Applied Catalysis B: Environmental, vol. 243, pp. 397–414.
Datye and Votsmeier, “Opportunities and challenges in the development of advanced materials for emission control catalysts,” Nature Materials, vol. 20, no. 8, pp. 1049–1059.
Zhang et al., “Diesel particulate filter regeneration mechanism of modern automobile engines and methods of reducing PM emissions: A review,” Environmental Science and Pollution Research, vol. 30, pp. 39338–39376.
Duan et al., “Effect of ash on temperature and particulate emission characteristics of diesel particulate filter during active regeneration,” Journal of Cleaner Production, vol. 426, Art. no. 138980.
Bao, Z., Chen, H., Geng, L., Qi, D., Wu, H., Yan, X., Ji, Z., Zhang, P., Sun, F., & Zhang, W. Overview of technological development challenges of diesel particulate filters adapting to future emission regulations. Chemical Engineering Journal, 506, 159982.
Rothe, D., Knauer, M., Emmerling, G., Deyerling, D., & Niessner, R. Emissions during active regeneration of a diesel particulate filter on a heavy duty diesel engine: Stationary tests. Journal of Aerosol Science, 90, 14–25.
Raza, M., Chen, L., Leach, F., & Ding, S. A review of particulate number (PN) emissions from gasoline direct injection (GDI) engines and their control techniques. Energies, 11(6), 1417.
Giechaskiel, B., et al. Effect of pulsed power on particle matter in diesel engine exhaust using a DBD plasma reactor. IEEE Transactions on Plasma Science, 41(7), 1944–1951.
Yamamoto, T., Kuroki, T., Fujishima, H., Sakaoka, S., Nishimi, M., & Yamashita, M. Performance evaluation of nonthermal plasma reactors for NO oxidation in diesel engine exhaust gas treatment. IEEE Transactions on Industry Applications, 37(6), 1607–1612.
Refbacks
- There are currently no refbacks.