Open Access
Subscription Access
Graphical Analysis of Heat Transfer Enhancement Techniques Thermal Performance Factor
Abstract
Heat transfer enhancements are of several types and have the potential to reduce the size of the equipment. Several researchers have continued studying about this topic and made significant improvements in this field. These innovations have reduced cost and size of devices over time. Many devices are becoming affordable and efficient because of such studies. Hence the Heat Transfer Enhancement techniques are really an important factor in technology. Now an essential parameter in this heat transfer enhancement field is the thermal performance factor, which decides the transfer of heat rate to friction factor. This paper discusses several heat transfer technique’s Thermal Performance Factors and presents them in a graphical manner.
Cite asSoumadeep Chatterjee, & Soubhonik Banerjee. (2021). Graphical Analysis of Heat Transfer Enhancement Techniques Thermal Performance Factor. Research and Applications of Thermal Engineering, 3(3), 1–10. http://doi.org/10.5281/zenodo.4433453
References
Sujoy Kumar Saha et al., Introduction to Enhanced Heat Transfer, Thermal Engineering And Applied Science, Springer Briefs In Applied Sciences And Technology, https://doi.org/10.1007/978-3-030-20740-3
Smith Eiamsa-ard et. al., International Communications in Heat and Mass Transfer, Volume 36, Issue 4, April 2009, Pages 365-371
Smith Eiamsa-ard et al. International Journal of Heat and Mass Transfer, Volume 53, Issues 7–8, March 2010, Pages 1364-1372
Rahimi et al. 2009, Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts, Chemical Engineering and Processing: Process Intensification, Volume 48, Issue 3, March 2009, Pages 762-770
Shabanian et. al., 2011, CFD and experimental studies on heat transfer enhancement in an air cooler equipped with different tube inserts, International Communications in Heat and Mass Transfer, Volume 38, Issue 3, March 2011, Pages 383-390
Smith Eiamsa-ard et al, Thermal Performance Evaluation of Heat Exchanger Tubes Equipped with Coupling Twisted Tapes, A Journal of Thermal Energy Generation, Transport, Storage, and Conversion, Volume 26, 2013 - Issue 5
Smith Eiamsa-ard et al., Heat transfer enhancement in a tube using delta-winglet twisted tape inserts, Applied Thermal Engineering, Volume 30, Issue 4, March 2010, Pages 310-318
Promvonge et. al., Experimental study on heat transfer in square duct with combined twisted-tape and winglet vortex generators, International Communications in Heat and Mass Transfer, Volume 59, December 2014, Pages 158-165
Wongcharee and Eiamsa-ard., Heat transfer enhancement by twisted tapes with alternate-axes and triangular, rectangular and trapezoidal wings, Chemical Engineering and Processing: Process Intensification, Volume 50, Issue 2, February 2011, Pages 211-219
Eiamsa-ard and Wongcharee, Heat transfer characteristics in micro-fin tube equipped with double twisted tapes: Effect of twisted tape and micro-fin tube arrangements, Journal of Hydrodynamics, Ser. B, Volume 25, Issue 2, April 2013, Pages 205-214
Bhuiya et al., Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts, International Communications in Heat and Mass Transfer
Volume 48, Nov 2013, Pg- 124-132
Skullong, S. et al., 2016a. Heat transfer and turbulent flow friction in a round tube with staggered-winglet perforated-tapes. Int. J. Heat Mass Transf. 95,Pages 230–242
Yadav, A.S., Bhagoria, J.L., 2014. A CFD based thermo-hydraulic performance analysis of an artificially roughened solar air heater having equilateral triangular sectioned rib roughness on the absorber plate. Int. J. Heat Mass Transf. 70, Pages 1016–1039.
Gawande, V.B. et al., 2015. Experimental and CFD-based thermal performance prediction of solar air heater provided with right-angle triangular rib as artificial roughness. J. Brazilian Soc. Mech. Sci. Eng.
Rao et al., 2015. Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimples. Exp. Thermal Fluid Sci. 61 (C), Pages 201-209.
Salameh et al,, 2016. Experimental investigation of the effect of variously-shaped ribs on local heat transfer on the outer wall of the turning portion of a U-channel inside solar air heater. Heat Mass Transf. 52 (3), Pages 539-546
Caliskan et al,, 2014. Experimental investigation of heat transfer in a channel with new winglet-type vortex generators. Int. J. Heat Mass Transf. 78, Pages 604–614.
Tang et al, 2015. Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube. Int. J. Heat Mass Transf. 90 (17–18), Pages 523–541.
Refbacks
- There are currently no refbacks.