Open Access Open Access  Restricted Access Subscription Access

Simulation and Performance Evaluation of 5G Downlink Throughput over 3.5 GHz and 28 GHz Bands: An SNR-Based Analysis Using MATLAB

Kukuchuku. Shadrach, Wobiageri Ndidi Abidde, Ibanibo Tamunotonye Sotonye

Abstract


This paper presents a comprehensive simulation and performance evaluation of 5G downlink throughput over two prominent frequency bands, 3.5 GHz (sub-6 GHz) and 28 GHz (mmWave) using MATLAB R2023b and the 5G Toolbox. The simulation investigates the relationship between Signal-to-Noise Ratio (SNR) and downlink throughput, leveraging a detailed modelling of the 5G New Radio (NR) physical layer, including Orthogonal Frequency Division Multiplexing (OFDM), Low-Density Parity-Check (LDPC) coding, MIMO configurations (4×4 and 8×8), and advanced beamforming algorithms. The SNR is calculated from the received signal power and thermal noise, incorporating link budget parameters and 3GPP TR 38.901 channel models for Urban Macro (UMa) and Urban Micro (UMi) environments. 

Throughput is estimated using the Shannon capacity, and further refined using modulation and coding scheme (MCS) parameters, number of resource elements, and slot configurations. Path loss models specific to each environment and frequency band are applied, with significant differences observed due to increased propagation loss at 28 GHz. Simulation results reveal that the 28 GHz band achieves significantly higher peak throughput due to larger bandwidth and beamforming gain, despite suffering from higher path loss. The 3.5 GHz band, while offering lower peak rates, demonstrates more stable throughput across mobility scenarios due to better propagation characteristics. 

The throughput-SNR curves highlight the non-linear gain from higher-order MCS at high SNR regions, especially for 8×8 MIMO configurations. These findings underscore the importance of adaptive frequency and antenna strategies in 5G network planning and optimization.


Full Text:

PDF

References


3GPP. (2020). Release 15 Description: Summary of Rel-15 Work Items. Retrieved from https://www.3gpp.org/release-15.

3GPP. (2018a). 3GPP TR 38.801 V14.0.0 - Study on New Radio Access Technology: Radio Access Architecture and Interfaces. Retrieved from https://www.3gpp.org/DynaReport/38801.htm.

Qualcomm. (2020). Making 5G NR a Reality. Retrieved from https://www.qualcomm.com/media/documents/files/making-5g-nr-a-reality.pdf.

Ericsson. (2020). 5G NR: The Next Generation Wireless Access. Retrieved from https://www.ericsson.com/en/reports-and-papers/white-papers/what-is-5g-nr.

3GPP. (2021). Release 17 Description: Summary of Rel-17 Work Items. Retrieved from https://www.3gpp.org/release-17.

Rappaport, T. S., Xing, Y., Kanhere, O., Ju, S., Madanayake, A., Mandal, S., & Alkhateeb, A. (2017). Wireless communications and applications above 100 GHz: Opportunities and challenges for 6G and beyond. IEEE Access, 7, 78729–78757. https://doi.org/10.1109/ACCESS.2019.2921522.

Goldsmith, A. (2005). Wireless Communications. Cambridge University Press.

3GPP. (2018b). Technical Specification Group Radio Access Network; NR; Physical layer procedures for data (Release 15) (3GPP TS 38.214 V15.4.0). https://www.3gpp.org.

MathWorks. (2023). 5G Toolbox User’s Guide. MATLAB Documentation. https://www.mathworks.com/help/5g/.

3GPP. (2018c). Technical Report on Channel Model for Frequencies from 0.5 to 100 GHz (3GPP TR 38.901 V15.0.0). https://www.3gpp.org.


Refbacks

  • There are currently no refbacks.