Open Access Open Access  Restricted Access Subscription Access

Effect on Mechanical Properties of Fly Ash Concrete Using Iron Slag as Partial Replacement of Sand

Ms Aayushi

Abstract


Sustainability in concrete production can be accomplished by advancements in substitutions of basic materials utilized. A colossal amount of cement is required to meet infrastructure development, so to diminish this utilization; substitute components are included in cement such as fly ash. Developing ecological confinements to exploitation of sand from river beds prompts to look for alternatives, subsequently to see the effect of iron slag on property of concrete by replacing sand. This research demonstrates the possibilities of using iron slag and fly ash as a partial replacement of sand and cement in concrete. The result shows that iron slag is heighten the strength of fly ash concrete.

Full Text:

PDF

References


American Public Health Association, American Water Works Association, Water Pollution Control Federation, & Water Environment Federation. (1915). Standard methods for the examination of water and wastewater (Vol. 2). American Public Health Association.

Babu, R., & Chaudhuri, M. (2005). Home water treatment by direct filtration with natural coagulant. Journal of water and health, 3(1), 27-30.

Rashad, A. M. (2015). A brief on high-volume Class F fly ash as cement replacement–A guide for Civil Engineer. International Journal of Sustainable Built Environment, 4(2), 278-306.

Aldea, C. M., Young, F., Wang, K., & Shah, S. P. (2000). Effects of curing conditions on properties of concrete using slag replacement. Cement and Concrete Research, 30(3), 465-472.

Anand, S., Vrat, P., & Dahiya, R. P. (2006). Application of a system dynamics approach for assessment and mitigation of CO2 emissions from the cement industry. Journal of environmental management, 79(4), 383-398.

Bakharev, T., Sanjayan, J. G., & Cheng, Y. B. (2002). Sulfate attack on alkali-activated slag concrete. Cement and Concrete research, 32(2), 211-216.

Binici, H., Temiz, H., & Köse, M. M. (2007). The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice. Construction and Building Materials, 21(5), 1122-1128.

Dubey, A., Chandak, R., & Yadav, R. K. (2012). Effect of blast furnace slag powder on compressive strength of concrete. International Journal of Scientific & Engineering Research, 3(8), I094-I098.

Duran-Herrera, A., Juárez, C. A., Valdez, P., &Bentz, D. P. (2011). Evaluation of sustainable high-volume fly ash concretes. Cement and Concrete Composites, 33(1), 39-45.

Filho, J. H., Medeiros, M. D., Pereira, E., Helene, P., & Isaia, G. C. (2013). High-volume fly ash concrete with and without hydrated lime: chloride diffusion coefficient from accelerated test. Journal of Materials in Civil Engineering, 25(3), 411-418.


Refbacks

  • There are currently no refbacks.