Effect on Mechanical Properties of Fly Ash Concrete Using Iron Slag as Partial Replacement of Sand
Abstract
Full Text:
PDFReferences
American Public Health Association, American Water Works Association, Water Pollution Control Federation, & Water Environment Federation. (1915). Standard methods for the examination of water and wastewater (Vol. 2). American Public Health Association.
Babu, R., & Chaudhuri, M. (2005). Home water treatment by direct filtration with natural coagulant. Journal of water and health, 3(1), 27-30.
Rashad, A. M. (2015). A brief on high-volume Class F fly ash as cement replacement–A guide for Civil Engineer. International Journal of Sustainable Built Environment, 4(2), 278-306.
Aldea, C. M., Young, F., Wang, K., & Shah, S. P. (2000). Effects of curing conditions on properties of concrete using slag replacement. Cement and Concrete Research, 30(3), 465-472.
Anand, S., Vrat, P., & Dahiya, R. P. (2006). Application of a system dynamics approach for assessment and mitigation of CO2 emissions from the cement industry. Journal of environmental management, 79(4), 383-398.
Bakharev, T., Sanjayan, J. G., & Cheng, Y. B. (2002). Sulfate attack on alkali-activated slag concrete. Cement and Concrete research, 32(2), 211-216.
Binici, H., Temiz, H., & Köse, M. M. (2007). The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice. Construction and Building Materials, 21(5), 1122-1128.
Dubey, A., Chandak, R., & Yadav, R. K. (2012). Effect of blast furnace slag powder on compressive strength of concrete. International Journal of Scientific & Engineering Research, 3(8), I094-I098.
Duran-Herrera, A., Juárez, C. A., Valdez, P., &Bentz, D. P. (2011). Evaluation of sustainable high-volume fly ash concretes. Cement and Concrete Composites, 33(1), 39-45.
Filho, J. H., Medeiros, M. D., Pereira, E., Helene, P., & Isaia, G. C. (2013). High-volume fly ash concrete with and without hydrated lime: chloride diffusion coefficient from accelerated test. Journal of Materials in Civil Engineering, 25(3), 411-418.
Refbacks
- There are currently no refbacks.