The Advanced Strength Values like Stress, Strain in Engineering and Medical Field

Abstract

The dentists are advised as in many cases such as artificial teeth implantation for many materials design.  While for these design one has to know properly how much teeth material have strength like tensile , compressive, shear , bending stresses at particular materials, so these values in terms of some definite MPa also knowing jaw strength as it reaches same strength compared to artificial teeth then fracture will happen as accidents. always strength of jaws must more than teeth which will be implanted one.  Not only dental field as many cases implants, plastic surgery like bone, leg, ortho joints many cases one has to adopt design considerations for strength of artificial materials which will be implanted . Consideration materials like polymers, plastic, golden teeth, etc all have different strength values but age of the patient also taken in to major concern. In engineering cases like all machinery parts elements, papers have different strength values as tensile, compressive, shear, bending, torsion, etc. Again if applied external force implanted material  exceeds  natural force like jaws, leg, then fracture will happen. Failure of  any operation surgery is mainly stress analysis design consideration if its good proper design operation will be success. Main intention of this implant is enhancing strength of design materials as metals, alloys, polymers, composites, etc materials have definite particular types of strength values.  The chronic stress leads to fatigue and finally failure of that particular organ or body parts. In hair transplantation also same design considerations are allowed concepts. In short all transplantation design concepts applicable as good as possible. The skin also have definite tolerance limit of light barrier and after greater light radiation like uv, x rays, gamma rays penetration will occur